Programming/pairing a ZAPF handheld transmitter

1. Press the P button on the door opener:
   • Press the P button on the door opener for 4 seconds.
   • The ‘Door open’ symbol appears on the display.
2. Press the P button again:
   • Press the P button twice in quick succession.
   • The WiFi symbol lights up on the display.
3. Programming the ZAPF handheld transmitter:
   • Use a pointed object to briefly press the ‘programming button’ on the back of the handheld transmitter once.
   • The green LED light on the handheld transmitter flashes.
   • Press the desired button on the handheld transmitter once.
   • The red LED flashes.
4. Completing the programming process:
   • Press the P button on the gate operator once.
   • The handheld transmitter is now programmed.

To program another gate operator with the same handheld transmitter:

1. Steps for second gate operator:
   • Repeat steps 1 to 3 on the second gate operator.
   • Select a different button on the hand-held transmitter.
   • Press the P button on the second door opener.
   • The hand-held transmitter is now programmed for the second door opener.

Optional: Programming the ventilation position:

1. P button for ventilation position:
   • Press the P button on the door opener for 11 seconds.
   • Select programme 1 (confirm once with the P button).
   • The display flashes.
   • Move the garage door to the desired ventilation position using the +/- buttons on the door drive.
   • Confirm once with the P button.
2. Setting partial opening:
   • ‘Partial opening’ appears on the display.
   • Confirm once with the P button.
3. Select programme 4:
   • Use the ‘+’ button on the door opener to switch to programme 4.
   • Confirm once with the P button.
   • The number 1 will light up on the display.
   • Confirm again with the P button.
4. Set ventilation position on hand-held transmitter:
   • Briefly press the ‘programming button’ on the back of the hand-held transmitter once with a pointed object.
   • Press the desired button on the front of the hand-held transmitter once.
   • Press and hold the P button on the gate operator for 5 seconds.
   • The ventilation position is now programmed.